Pinellas County, FL Terrazzo Floor Refinishing

The Process

Once the preparations are complete - grinding nails, patching holes, removing tile or sheet products, etc. - the grinding process can begin.

Diamond abrasives of various types and coarseness are used. Starting with an aggressive segmented metal bond diamond for cutting through wax, glue, and stains. Followed by a series of resin matrix diamond abrasives ranging from 30 grit to 400 grit for smoothing, honing and the beginning of the polishing process. The 6 grinding, honing and polishing steps are done with water to minimize dust and the slurry is vacuumed off the floor with each pass.

After overnight drying, the final process can be completed. Recrystallization is a chemical process that seals the floor and creates a high gloss that is harder than the stone itself.

Maintenance

The recrystallized Terrazzo is easily maintained and will last 4 or 5 times longer then the acrylic finish. With professional periodic buffing, recrystallized Terrazzo will last many years.

Use good sand catching door mats, and shake them out often. Stick felt pads under furniture and dining room chairs, etc.

Damp mop with 2 - 3 oz. of vinegar or non-sudsy ammonia per gallon of water.

Do not apply wax or other coatings on recrystallized Terrazzo. Professional buffing, once each year or two, will extend the crystallized Terrazzo floor for many years to come.

Terrazzo restoration costs less than most carpets.

Contact Finish Line Floors, Inc. today at 727-898-4900, or browse our website for more information about terrazzo stain removal or terrazzo repair.